Profile cutting machine operating procedures

 

1.Instructions for use:

Suitable for cutting a variety of special aluminum, aluminum alloy, copper, copper alloy, plastic and non-metallic materials such as carbon fiber, especially for aluminum doors and windows, frames, plastic steel, wood, aluminum extrusion, cutting of paper tubes and profiles ; pressing the handheld saws material, material distortion, low loss; cutting angle precision; small vibration, low noise; simple operation, high efficiency, single or multi-branch sawing together. Can be used for 90 ° straight cut, 90 ° --45 ° to the left or right to any miter and so on. Abrasive cutting machines can square flat metal pipes, flat steel, I-beam, channel steel, carbon steel yuan, yuan pipe and other materials cutting.

 

2.Structure Description:

1)The main parameters:

(1)Profile Cutting Machine Model:

(2)Cutting effective degree: 45 ° 90 °

(3)Blade types and specifications:

Φ350mm × 4mm steel circular saw blades

Grinding wheel size: 400mm × 3mm

(4)Host motor 3HP / 2P, 3400 rev / min.

(5)Cutting range:

round maximum diameter: 120mm

square: 120 × 120mm

rectangular: 200 × 120mm

(6)Weight: about 12KG

 

2)The main structure:

(1) insulated handles power switch.

(2) manual pressure to feed formula.

(3) electric motor.

(4) blade guard.

(5) blades and locking button devices.

(6) synchronous landing glass cover attached arm.

(7) sawdust convergence outlet pipe.

(8) sawing assembly angle set Huan longitudinal twist.

(9) head up and down manually locking device.

(10) 90-degree rotary table.

(11) lateral table rotation lock twist.

(12) of the workpiece clamping elastic handle.

 

3.Related Accessories:

(1) special spare parts.

(2) blade and locking nut China.

(3) synchronous landing glass attached hood.

(4) Plug and drag the power cord.

(5) brushless motor spare terminal.

(6) the level of body positioning instrument.

(7) mask or face shield.

(8) Auxiliary long workpiece holder.

(9) special disassembly and electrical test tools.

 

4.Use and maintenance

1)The correct use

(1)Must be carefully checked before the performance of the device (1) use, to ensure the integrity of each member.

(2)power knife switch, the tightness of the blade, blade guard or a safety barrier for detailed examination, console must be solid, night work should have enough illumination.

(3)Before use, first open the main switch, load test turn a few laps, to be confirmed safe and correct before allowing start.

(4)The operator must view is consistent with the conventional power 220VA rated voltage power tools, in order to avoid receiving the wrong 380VA power, not use the rated power of less than 4800 rev / min blade.

(5)must hold steady even force vertical cutting machine cut handle and a fixed end to a solid and reliable.

(6)Do not attempt to cut saws unclamped small parts or with serious edge profiles (eg outer diameter less than 15 cm).

(7)In order to improve work efficiency. Before sawing single or multi-branch together, we must do a good job supporting fixture positioning.

(8)may not be powerful sawing operation, you have to wait before cutting the motor speed to reach full speed.

(9)Do not allow anyone to stand behind saw, power outages, or leave the rest to work, should immediately cut off the power.

(10)shall not release either hand or lift the arm when the blade is not stopped from saw or workpiece.

(11)Do not operate when the cover is not in place, the hand should not be placed within 15 cm away from the saw blade. You can not lean over or bypassing saw, when the operation body Xiece 45 degrees is appropriate.

(12)There appear abnormal sound, should immediately stop inspection; repair or replacement must first cut off the power before fitting, and the like blade stops completely.

(13)using a cutting machine such as when working in wet places, must stand on an insulating mat or dry wood were. Or climb in the explosion dangerous area must use proper safety precautions.

 

2)Maintenance

(1) by a professional electrician to replace the cutter regularly replace the brushes, blades and check the return spring force is intact.

(2) protect the cutter body as a whole is in good condition and clean and remove dirt to ensure that the blade dynamic and smooth transfer.

(3) periodic inspection by a professional cutting machine components for damage, serious injury can not be reused should be replaced, repaired.

(4) timely addition to the body due to job loss body screw fastener.

(5) regularly check the transmission parts bearings, gears and cooling hood, Blade is flexible intact, timely filling oil to the rotating parts, in order to prolong the life of hand drill.

(6) after use hand drill to promptly return the tool library for safekeeping. Eliminate personal tool storage cabinet overnight.

 

5.Safety rules:

(1) The operator must be familiar with the performance of equipment, compliance with safety procedures to prevent accidents. Current Affairs work.

(2) cutting machines necessary to concentrate, not only to keep a clear head, to be more rational operating power tools tired, drunk or prohibited doping, cutting machine operation after drugs. (3) power line must be safe and reliable, it is strictly prohibited without permission Luanla. Performance of the device must be carefully checked before use to ensure that all parts intact.

(4) put on the right clothes, do not wear loose clothes, not to wear jewelry or long hair, wearing gloves and cuff are not prohibited buckle operation.

(5) machining a workpiece to be clamped firmly prohibited workpiece clamping is not tight to start cutting.

(6) is strictly prohibited on the plane of the wheel, grinding burr of the workpiece, grinding wheel to prevent chipping.

(7) during the cutting operation must deviate from the grinding wheel front, and wear protective glasses.

(8) Do not use an existing incomplete grinding wheel, should be cut to prevent Mars scattered, and away from flammable materials.

(9) clamping a workpiece clamping should be smooth firm, shields must be installed correctly, you should check the air operation after boot setup, without vibration and abnormal noise.

(10) a new way to replace cutting blades or grinding wheel piece, do not lock nut too hard to prevent the blade or grinding wheel crack accidents.

(11) jitter and other equipment failure, should immediately stop repair, prohibited ill and doping and drink operations, the operator is prohibited to wear gloves. As during operation causes dust, wear a mask or face shield.