Maintenance and maintenance of chain saw (3)

1. Should be stipulated in the product manufacturer of machine instruction manual is provided, correct maintenance.

2. Remove all clippings, soil particles and sundry.Check for loose fasteners, the phenomenon such as missing parts.Check whether the leakageOil.Should be cleaned after each use of the blade, and oil.Dirt adhering to obsolete, you should clean oil again after immersion and brush.

3. The fault check: common faults generally divided into the engine won't start or starting difficulties;Output power is insufficient, gear box overheating, etc.According to theCheck and repair machine specification.

4. Work in normal circumstances, excessive wear and tear parts serious deformation, fracture, parts, parts failure, etc., areBig fault, without thorough repair, may not continue to use.

5. The main failure mechanism and transmission parts, excluding time should be less than 1.5 hours.Abnormal failure happened at ordinary times, eliminate time below 1.5 hours (0.5 hours) is called the fault.Failure occurs, the allowed in class assignments repair downtime at work, and then continue to use.

6. Found in the working process of the loose fasteners, electrical phenomenon such as poor contact, called the small fault.In influencing quality of work and job security, however, allows temporary continue to work, to work again after the completion of repair or adjust.

click here to get more information : www.barkparts.com