Gasoline engine powered trimmers usually have a minimum 21 ml displacement motor. At this size, they can easily be 2 mm (0.079 inches) and some nylon line as an attachment to the wire spools. 32 cc engine can swing 2.75 mm (0.108 inches) line, often with a metal blade parts. Most pruning and demand the use of two-stroke engines blended gasoline and oil. Since the four-stroke engine pollution laws are becoming more popular. For example, Honda, MTD and artisans four-stroke engine tuning. Other companies, such as John Deere, now with low-emission two-stroke engine trim. Steele called 4MIX production and use of hybrid technology, four-stroke engine tuning. 4MIX cut no oil. This engine is used pre-mixed gasoline, two-stroke engine lubrication.
Electric trimmer has a very light, easy to maneuver and the advantages of easy to operate the equipment. However, the deployment of power line length limit them, they are usually less powerful than gasoline engines and robustness of those on the ground. Nylon motor is generally limited to 2.5 mm (0.098 inches) in maximum diameter, because of their low power output (400 Watts to about 1200). Recently, electric trimmers offer the same performance as gasoline-powered trimmers. Battery-powered unit is recharged after each use. Charging time is usually a few hours long; when a run down of some of the first models offer to reduce the charging time is 30-2 minutes, or removable battery pack that allows users to have multiple battery ready to swap out between fast charging options. [Citation needed]
A typical two-stroke engines used in pollution on secateurs serious, due to incomplete combustion in the cylinder. This results in unburned fuel through the exhaust system and escape into the environment. US emission standards specifically limit emissions from small engines. Electric vehicles produce no emissions when in use. Battery-powered unit is usually small or large sealed lead acid, nickel metal hydride or lithium-ion battery.
More information click here : )
没有评论:
发表评论