Operating Procedures of Chain Saw

1.  The operator should be stipulated in the product specification, normal use.

2.  Pruning the branches of the green fence with density maximum principal rod diameter should be consistent with use of hedgerow pruning machine performance parameters. 

3.  Work when pruning machine must be in the normal state of technology.Blades should be flexible. The gap shoud be less than gap 1 mm .The following, between reciprocating closed pruning machine interface is not over the 0.15 mm. 

4.  When engine working at room temperature, starting three times to allow three back to pull the starter rope.At least one starting Work.If not or difficult to start, should find out reason, after debugging,then it can continue to use. 

5.  Should pay attention to in the working process of the fastening connection.According to the trim quality situation adjust the blade clearance or replace damaged parts .Are not allowed to work with failure. 

6.  After pruning it should be level off, the quality of the cut, tear rate is less than the basic without leakage10%

lick here to get more imformation.

Taizhou Bak Industry&Trading Co., Ltd. Add.: Tianshi mansion, Luqiao district, Taizhou, Zhejiang, P.R. ChinaTEL:86-0576-80255132                                Fax: 0086-57680256656
M.T&What's APP:0086-18857613399      Skype: tristazjy    QQ: 353047508
Email: sales1@tzbak.com

Web:www.bakparts.com; www.tzbak.com